HOW 2 FLASH UR PHONE USING PHOENIX (NOKIA)

This tutorial can b used to upgrade,downgrade and flashing of dead phones.

Tools Required:
1.Phoenix Service suit:
Direct Download:

CODEdl01.seliweb.com/files/temp/phoenix_service_sw_2007_4_6_170.exe


2.Diego,Dongle & Phoenic cracks:
Download Link:

CODEhttp://www.mediafire.com/?cx7cozjhn1t


3.UFS Suite Setup:
Download Link:

CODEhttp://rapidshare.com/files/13561888/UFS_Suite_Setup_v03.04.000.exe.html


Before Flashing:

- backup your phone number and phone number of important personal information.

Uninstall everthing related to nokia ie nokia pc suite,nokia connectivity cable driver.
After uninstallation,delete C:/Program files/nokia folder and C:/Program files/common files/nokia folder.and then after a pc restart, clean ur registry.Lets Start.......

->Run and install the following file: Diego 3.09.msi

->Run Phoenix Service Software 2007.

->Open The Dongle Crack First. Just Open It, Don’t Run It

>Start Installing Phoenix 2007

->. During The Installation You’ll Get An Error Message

->Press on “Retry” and run the dongle crack immediately after! (Check that the destination folder is Windows/system32 of the crack). If you’re not fast enough, the message will reappear and you’ll have to re-run the crack the same way as above (but faster…)

>You’ll get 2 error messages, \"DESKEY\" Just Press OK, And Then Finish

->Run the Phoenix 2006 crack

-> Install UFS Suite Setup

Choose the type of setup you prefer
custom

Install UFS site to
C:/Program Files/Nokia/Phoenix

->Select "UFS_DCTxBB5" and Then Tik "Flash loaders"

-> Now Install Firmware as I have RM-133_ME_EMEA_4.0812.4.2.1_v10.01.exe, Do not change drive letter, can be installed directly.

Firmware can b downloaded from

http://www.gsmegypt.com/support/mouazen/
http://www.blog.gsmegypt.info/?cat=39

HOW 2 FLASH UR PHONE USING PHOENIX (NOKIA)

->Now Run Phoenix 2007

-> ###### Maintain and Add Details

->After Adding Details ###### Ok

->Remove the SIM card, and memory card from your phone.

->Turn on the phone (it will start in offline mode because there is no SIM card inside).
->Plug in the USB cable to both the phone and the computer.
->When prompted, select "PC Suite" from the menu list on the phone.
->Wait for *all* drivers to fully install themselves before proceeding. You will see the driver icon disappear when it is complete.

-> Now Choose File Then Manage Connection

->###### "New"

->###### USB, and then ###### Next

->It will then search your USB ports for the phone. When it finds it, hit Finish

->Once it has finished scanning, ###### apply, then ###### close.

->Next, select "Scan Product" from the File menu.

->From the Flashing menu, choose Firmware Update.

->Wait for Phoenix to continue talking to the phone. You will see some information scroll by in the firmware Update window.
->###### Browse

->See the product code section.U should find ur product code in that column.If u see "ur" product code,well and good.

-> but if u dont see ur code,or dont see anything for that matters,press on the "..." in the given prCode section.
Select any one prCode which says APAC1 or APAC2, or euro1 or euro2.###### on one of them and press ok.

->Press Start

The flashing process takes about five minutes to complete. The first few steps ensure connectivity to the phone.
After it verifies connectivity,Phoenix will automatically restart the phone.


Once it has completed (a dialog box will popup saying it has completed successfully), you may closePhoenix,
unplug the USB cable, and restart your phone. It should startup with the firmware you flashed to it.